Product Videos
Description
Enable Your Heated & Cooled Seats
You've got the seats, now finish the installation by enabling your thermoelectric heating and cooling!
This kit provides a standalone computer with all related wiring to operate the thermoelectric units built into factory cooled seats. An OEM switch is also included. One retrofit kit will get the heating & cooling system operable for a single seat.
Heated & Cooled Seat Wiring Made Easy
This can be installed into the original vehicle as an upgrade, retrofitted into an older vehicle, or even mounted on a pallet. If you have 12 volts and a compatible seat you've got all you need.
Doing It The Right Way
This kit costs less than the thermoelectric units you'll need to replace if you use an aftermarket controller that causes damage. All components in this kit are manufactured by the OEMs for Ford. This includes the crucial overheat protection circuit which is bypassed with aftermarket solutions. Cutting corners may save time on the track but when we're dealing with a thermoelectric unit right under your butt we prefer to do things by the book.
There are ways to jerry rig these to hook up "only the fans" but this system is not a closed system so these seats do not perform well with just ventilation, over 50% of the air volume is lost as waste at the thermoelectric unit.
Made To Order
Installation Instructions
This install is super easy! We're not exaggerating, it takes as little as five minutes. Simply unplug your original cooling unit from the factory wire harness, connect it to ours, provide 12 volts, mount your switch, and you're done. If you can change your own headlight bulbs you can install this kit.
Secure Payment
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.